dmesg - AMD Ryzen 7 7735HS

Return To AMD Ryzen 7 7735HS System Information

Linux version 6.5.0-9-generic (buildd@bos03-amd64-043) (x86_64-linux-gnu-gcc-13 (Ubuntu 13.2.0-4ubuntu3) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.41) #9-Ubuntu SMP PREEMPT_DYNAMIC Sat Oct  7 01:35:40 UTC 2023 (Ubuntu 6.5.0-9.9-generic 6.5.3)
Command line: BOOT_IMAGE=/vmlinuz-6.5.0-9-generic root=/dev/mapper/ubuntu--vg-ubuntu--lv ro quiet splash vt.handoff=7
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Hygon HygonGenuine
  Centaur CentaurHauls
  zhaoxin   Shanghai  
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009afefff] usable
BIOS-e820: [mem 0x0000000009aff000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a213fff] ACPI NVS
BIOS-e820: [mem 0x000000000a214000-0x00000000b063efff] usable
BIOS-e820: [mem 0x00000000b063f000-0x00000000b31abfff] reserved
BIOS-e820: [mem 0x00000000b31ac000-0x00000000b3208fff] ACPI data
BIOS-e820: [mem 0x00000000b3209000-0x00000000b827dfff] ACPI NVS
BIOS-e820: [mem 0x00000000b827e000-0x00000000b95fefff] reserved
BIOS-e820: [mem 0x00000000b95ff000-0x00000000baffcfff] usable
BIOS-e820: [mem 0x00000000baffd000-0x00000000bbffffff] reserved
BIOS-e820: [mem 0x00000000bce00000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000007be2fffff] usable
BIOS-e820: [mem 0x00000007bf340000-0x00000008601fffff] reserved
NX (Execute Disable) protection: active
e820: update [mem 0x96995018-0x969ca057] usable ==> usable
e820: update [mem 0x96995018-0x969ca057] usable ==> usable
e820: update [mem 0x9698a018-0x96994e57] usable ==> usable
e820: update [mem 0x9698a018-0x96994e57] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000009afefff] usable
reserve setup_data: [mem 0x0000000009aff000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
reserve setup_data: [mem 0x000000000a200000-0x000000000a213fff] ACPI NVS
reserve setup_data: [mem 0x000000000a214000-0x000000009698a017] usable
reserve setup_data: [mem 0x000000009698a018-0x0000000096994e57] usable
reserve setup_data: [mem 0x0000000096994e58-0x0000000096995017] usable
reserve setup_data: [mem 0x0000000096995018-0x00000000969ca057] usable
reserve setup_data: [mem 0x00000000969ca058-0x00000000b063efff] usable
reserve setup_data: [mem 0x00000000b063f000-0x00000000b31abfff] reserved
reserve setup_data: [mem 0x00000000b31ac000-0x00000000b3208fff] ACPI data
reserve setup_data: [mem 0x00000000b3209000-0x00000000b827dfff] ACPI NVS
reserve setup_data: [mem 0x00000000b827e000-0x00000000b95fefff] reserved
reserve setup_data: [mem 0x00000000b95ff000-0x00000000baffcfff] usable
reserve setup_data: [mem 0x00000000baffd000-0x00000000bbffffff] reserved
reserve setup_data: [mem 0x00000000bce00000-0x00000000bfffffff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x00000007be2fffff] usable
reserve setup_data: [mem 0x00000007bf340000-0x00000008601fffff] reserved
efi: EFI v2.8 by American Megatrends
efi: ACPI=0xb3208000 ACPI 2.0=0xb3208014 TPMFinalLog=0xb8236000 SMBIOS=0xb93d3000 SMBIOS 3.0=0xb93d2000 MEMATTR=0xacd93018 ESRT=0xade48c18 MOKvar=0xb938b000 INITRD=0xab7c6598 RNG=0xb31bd018 TPMEventLog=0x969cb018 
random: crng init done
efi: Remove mem56: MMIO range=[0xe0000000-0xefffffff] (256MB) from e820 map
e820: remove [mem 0xe0000000-0xefffffff] reserved
efi: Remove mem57: MMIO range=[0xfd000000-0xfedfffff] (30MB) from e820 map
e820: remove [mem 0xfd000000-0xfedfffff] reserved
efi: Not removing mem58: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
efi: Remove mem59: MMIO range=[0xfee01000-0xffffffff] (17MB) from e820 map
e820: remove [mem 0xfee01000-0xffffffff] reserved
efi: Remove mem61: MMIO range=[0x840000000-0x8601fffff] (514MB) from e820 map
e820: remove [mem 0x840000000-0x8601fffff] reserved
secureboot: Secure boot disabled
SMBIOS 3.4.0 present.
DMI: Micro Computer (HK) Tech Limited UM773 Lite/F7BFD, BIOS 1.06 02/27/2023
tsc: Fast TSC calibration using PIT
tsc: Detected 3193.878 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x7be300 max_arch_pfn = 0x400000000
MTRR map: 5 entries (3 fixed + 2 variable; max 20), built from 9 variable MTRRs
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
last_pfn = 0xbaffd max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000ade48c18 to 0x00000000ade48c50.
e820: update [mem 0xade48000-0xade48fff] usable ==> reserved
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x969d3000-0x9cdbefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000B3208014 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000B3207728 0000D4 (v01 ALASKA A M I    01072009 AMI  01000013)
ACPI: FACP 0x00000000B31FB000 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x00000000B31F4000 00613C (v02 ALASKA A M I    01072009 INTL 20200717)
ACPI: FACS 0x00000000B8234000 000040
ACPI: MSDM 0x00000000B3206000 000055 (v03 ALASKA A M I    01072009 AMI  01000013)
ACPI: SSDT 0x00000000B3205000 000573 (v01 AMD    ACDC     00000001 INTL 20200717)
ACPI: SSDT 0x00000000B31FC000 00808B (v02 AMD    AmdTable 00000002 MSFT 02000002)
ACPI: FIDT 0x00000000B31F3000 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x00000000B31F2000 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: FPDT 0x00000000B31F1000 000044 (v01 ALASKA A M I    01072009 AMI  01000013)
ACPI: VFCT 0x00000000B31E6000 00AE84 (v01 ALASKA A M I    00000001 AMD  31504F47)
ACPI: BGRT 0x00000000B31E5000 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: TPM2 0x00000000B31E4000 00004C (v04 ALASKA A M I    00000001 AMI  00000000)
ACPI: SSDT 0x00000000B31DE000 005354 (v02 AMD    AmdTable 00000001 AMD  00000001)
ACPI: CRAT 0x00000000B31DD000 000EE8 (v01 AMD    AmdTable 00000001 AMD  00000001)
ACPI: CDIT 0x00000000B31DC000 000029 (v01 AMD    AmdTable 00000001 AMD  00000001)
ACPI: SSDT 0x00000000B31D4000 007EBA (v01 AMD    AmdTable 00000001 INTL 20200717)
ACPI: WSMT 0x00000000B31D3000 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: APIC 0x00000000B31D2000 0000E8 (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: IVRS 0x00000000B31D1000 0001A4 (v02 AMD    AmdTable 00000001 AMD  00000001)
ACPI: SSDT 0x00000000B31D0000 0007D7 (v01 AMD    AmdTable 00000001 INTL 20200717)
ACPI: SSDT 0x00000000B31CE000 0010A5 (v01 AMD    AmdTable 00000001 INTL 20200717)
ACPI: SSDT 0x00000000B31C4000 009479 (v01 AMD    AmdTable 00000001 INTL 20200717)
ACPI: SSDT 0x00000000B31BF000 004FC3 (v01 AMD    AmdTable 00000001 INTL 20200717)
ACPI: SSDT 0x00000000B31BE000 000BEA (v01 AMD    AmdTable 00000001 INTL 20200717)
ACPI: Reserving FACP table memory at [mem 0xb31fb000-0xb31fb113]
ACPI: Reserving DSDT table memory at [mem 0xb31f4000-0xb31fa13b]
ACPI: Reserving FACS table memory at [mem 0xb8234000-0xb823403f]
ACPI: Reserving MSDM table memory at [mem 0xb3206000-0xb3206054]
ACPI: Reserving SSDT table memory at [mem 0xb3205000-0xb3205572]
ACPI: Reserving SSDT table memory at [mem 0xb31fc000-0xb320408a]
ACPI: Reserving FIDT table memory at [mem 0xb31f3000-0xb31f309b]
ACPI: Reserving MCFG table memory at [mem 0xb31f2000-0xb31f203b]
ACPI: Reserving FPDT table memory at [mem 0xb31f1000-0xb31f1043]
ACPI: Reserving VFCT table memory at [mem 0xb31e6000-0xb31f0e83]
ACPI: Reserving BGRT table memory at [mem 0xb31e5000-0xb31e5037]
ACPI: Reserving TPM2 table memory at [mem 0xb31e4000-0xb31e404b]
ACPI: Reserving SSDT table memory at [mem 0xb31de000-0xb31e3353]
ACPI: Reserving CRAT table memory at [mem 0xb31dd000-0xb31ddee7]
ACPI: Reserving CDIT table memory at [mem 0xb31dc000-0xb31dc028]
ACPI: Reserving SSDT table memory at [mem 0xb31d4000-0xb31dbeb9]
ACPI: Reserving WSMT table memory at [mem 0xb31d3000-0xb31d3027]
ACPI: Reserving APIC table memory at [mem 0xb31d2000-0xb31d20e7]
ACPI: Reserving IVRS table memory at [mem 0xb31d1000-0xb31d11a3]
ACPI: Reserving SSDT table memory at [mem 0xb31d0000-0xb31d07d6]
ACPI: Reserving SSDT table memory at [mem 0xb31ce000-0xb31cf0a4]
ACPI: Reserving SSDT table memory at [mem 0xb31c4000-0xb31cd478]
ACPI: Reserving SSDT table memory at [mem 0xb31bf000-0xb31c3fc2]
ACPI: Reserving SSDT table memory at [mem 0xb31be000-0xb31bebe9]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000007be2fffff]
NODE_DATA(0) allocated [mem 0x7be2d5000-0x7be2fffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x00000007be2fffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009ffff]
  node   0: [mem 0x0000000000100000-0x0000000009afefff]
  node   0: [mem 0x000000000a000000-0x000000000a1fffff]
  node   0: [mem 0x000000000a214000-0x00000000b063efff]
  node   0: [mem 0x00000000b95ff000-0x00000000baffcfff]
  node   0: [mem 0x0000000100000000-0x00000007be2fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000007be2fffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 96 pages in unavailable ranges
On node 0, zone DMA32: 1281 pages in unavailable ranges
On node 0, zone DMA32: 20 pages in unavailable ranges
On node 0, zone DMA32: 36800 pages in unavailable ranges
On node 0, zone Normal: 20483 pages in unavailable ranges
On node 0, zone Normal: 7424 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 33, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 34, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 1 global_irq 1 low edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: Using ACPI (MADT) for SMP configuration information
e820: update [mem 0xabd20000-0xabe7ffff] usable ==> reserved
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x09aff000-0x09ffffff]
PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a213fff]
PM: hibernation: Registered nosave memory: [mem 0x9698a000-0x9698afff]
PM: hibernation: Registered nosave memory: [mem 0x96994000-0x96994fff]
PM: hibernation: Registered nosave memory: [mem 0x96995000-0x96995fff]
PM: hibernation: Registered nosave memory: [mem 0x969ca000-0x969cafff]
PM: hibernation: Registered nosave memory: [mem 0xabd20000-0xabe7ffff]
PM: hibernation: Registered nosave memory: [mem 0xade48000-0xade48fff]
PM: hibernation: Registered nosave memory: [mem 0xb063f000-0xb31abfff]
PM: hibernation: Registered nosave memory: [mem 0xb31ac000-0xb3208fff]
PM: hibernation: Registered nosave memory: [mem 0xb3209000-0xb827dfff]
PM: hibernation: Registered nosave memory: [mem 0xb827e000-0xb95fefff]
PM: hibernation: Registered nosave memory: [mem 0xbaffd000-0xbbffffff]
PM: hibernation: Registered nosave memory: [mem 0xbc000000-0xbcdfffff]
PM: hibernation: Registered nosave memory: [mem 0xbce00000-0xbfffffff]
PM: hibernation: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[mem 0xc0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
Kernel command line: BOOT_IMAGE=/vmlinuz-6.5.0-9-generic root=/dev/mapper/ubuntu--vg-ubuntu--lv ro quiet splash vt.handoff=7
Unknown kernel command line parameters "splash BOOT_IMAGE=/vmlinuz-6.5.0-9-generic", will be passed to user space.
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Fallback order for Node 0: 0 
Built 1 zonelists, mobility grouping on.  Total pages: 7676207
Policy zone: Normal
mem auto-init: stack:all(zero), heap alloc:on, heap free:off
software IO TLB: area num 16.
Memory: 30335936K/31192860K available (20480K kernel code, 4268K rwdata, 13520K rodata, 4788K init, 17396K bss, 856664K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
ftrace: allocating 55224 entries in 216 pages
ftrace: allocated 216 pages with 4 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=16.
	Trampoline variant of Tasks RCU enabled.
	Rude variant of Tasks RCU enabled.
	Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 524544, nr_irqs: 1096, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20230331
APIC: Switch to symmetric I/O mode setup
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0, rdevid:160
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1, rdevid:160
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2, rdevid:160
AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3, rdevid:160
AMD-Vi: Using global IVHD EFR:0x246577efa2254afa, EFR2:0x0
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e09b272e24, max_idle_ns: 440795253091 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6387.75 BogoMIPS (lpj=12775512)
x86/cpu: User Mode Instruction Prevention (UMIP) activated
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP always-on protection
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
Speculative Return Stack Overflow: IBPB-extending microcode not applied!
Speculative Return Stack Overflow: WARNING: See  for mitigation options.
Speculative Return Stack Overflow: Mitigation: safe RET, no microcode
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
x86/fpu: Enabled xstate features 0x207, context size is 840 bytes, using 'compacted' format.
Freeing SMP alternatives memory: 44K
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,integrity
landlock: Up and running.
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
smpboot: CPU0: AMD Ryzen 7 7735HS with Radeon Graphics (family: 0x19, model: 0x44, stepping: 0x1)
RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1.
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
signal: max sigframe size: 3376
rcu: Hierarchical SRCU implementation.
rcu: 	Max phase no-delay instances is 1000.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
smpboot: x86: Booting SMP configuration:
.... node  #0, CPUs:        #2  #4  #6  #8 #10 #12 #14  #1  #3  #5  #7  #9 #11 #13 #15
Spectre V2 : Update user space SMT mitigation: STIBP always-on
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 16 processors activated (102204.09 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a213fff] (81920 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0xb3209000-0xb827dfff] (84365312 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 18:42:11, date: 2023-10-10
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1696963331.192:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 10 ACPI AML tables successfully acquired and loaded
ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Ignoring E820 reservations for host bridge windows
ACPI: Enabled 6 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0.GP11.PWRS: New power resource
ACPI: \_SB_.PCI0.GP11: Overriding _PRW sleep state (S4) by S0 from power resources
ACPI: \_SB_.PCI0.GP11.SWUS.PWRS: New power resource
ACPI: \_SB_.PCI0.GP12.PWRS: New power resource
ACPI: \_SB_.PCI0.GP12: Overriding _PRW sleep state (S4) by S0 from power resources
ACPI: \_SB_.PCI0.GP12.SWUS.PWRS: New power resource
ACPI: \_SB_.PCI0.GP17.PWRS: New power resource
ACPI: \_SB_.PCI0.GP17.VGA_.PWRS: New power resource
ACPI: \_SB_.PCI0.GP17.HDAU.PWRS: New power resource
ACPI: \_SB_.PCI0.GP17.ACP_.PWRS: New power resource
ACPI: \_SB_.PCI0.GP17.AZAL.PWRS: New power resource
ACPI: \_SB_.PCI0.GP17.XHC0.PWRS: New power resource
ACPI: \_SB_.PCI0.GP17.XHC1.PWRS: New power resource
ACPI: \_SB_.PCI0.GP19.XHC2.PWRS: New power resource
ACPI: \_SB_.PCI0.GP19.XHC3.PWRS: New power resource
ACPI: \_SB_.PCI0.GP19.XHC4.PWRS: New power resource
ACPI: \_SB_.PCI0.GP19.NHI0.PWRS: New power resource
ACPI: \_SB_.PCI0.GP19.NHI0: Overriding _PRW sleep state (S4) by S0 from power resources
ACPI: \_SB_.PCI0.GP19.NHI1.PWRS: New power resource
ACPI: \_SB_.PCI0.GP19.NHI1: Overriding _PRW sleep state (S4) by S0 from power resources
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0x840000000-0x7fffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:14b5] type 00 class 0x060000
pci 0000:00:00.2: [1022:14b6] type 00 class 0x080600
pci 0000:00:01.0: [1022:14b7] type 00 class 0x060000
pci 0000:00:02.0: [1022:14b7] type 00 class 0x060000
pci 0000:00:02.1: [1022:14ba] type 01 class 0x060400
pci 0000:00:02.1: enabling Extended Tags
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: [1022:14ba] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.4: [1022:14ba] type 01 class 0x060400
pci 0000:00:02.4: enabling Extended Tags
pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [1022:14b7] type 00 class 0x060000
pci 0000:00:03.1: [1022:14cd] type 01 class 0x060400
pci 0000:00:03.1: enabling Extended Tags
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:14b7] type 00 class 0x060000
pci 0000:00:08.0: [1022:14b7] type 00 class 0x060000
pci 0000:00:08.1: [1022:14b9] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.3: [1022:14b9] type 01 class 0x060400
pci 0000:00:08.3: enabling Extended Tags
pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1679] type 00 class 0x060000
pci 0000:00:18.1: [1022:167a] type 00 class 0x060000
pci 0000:00:18.2: [1022:167b] type 00 class 0x060000
pci 0000:00:18.3: [1022:167c] type 00 class 0x060000
pci 0000:00:18.4: [1022:167d] type 00 class 0x060000
pci 0000:00:18.5: [1022:167e] type 00 class 0x060000
pci 0000:00:18.6: [1022:167f] type 00 class 0x060000
pci 0000:00:18.7: [1022:1680] type 00 class 0x060000
pci 0000:01:00.0: [8086:15f3] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0xdc900000-0xdc9fffff]
pci 0000:01:00.0: reg 0x1c: [mem 0xdca00000-0xdca03fff]
pci 0000:01:00.0: reg 0x30: [mem 0xdc800000-0xdc8fffff pref]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1:   bridge window [mem 0xdc800000-0xdcafffff]
pci 0000:02:00.0: [14c3:0608] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0x7ff0300000-0x7ff03fffff 64bit pref]
pci 0000:02:00.0: reg 0x18: [mem 0x7ff0400000-0x7ff0403fff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0x7ff0404000-0x7ff0404fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.2: PCI bridge to [bus 02]
pci 0000:00:02.2:   bridge window [mem 0x7ff0300000-0x7ff04fffff 64bit pref]
pci 0000:03:00.0: [8086:f1aa] type 00 class 0x010802
pci 0000:03:00.0: reg 0x10: [mem 0xdcb00000-0xdcb03fff 64bit]
pci 0000:03:00.0: reg 0x1ac: [mem 0x00000000-0x00003fff 64bit]
pci 0000:03:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit] (contains BAR0 for 8 VFs)
pci 0000:00:02.4: PCI bridge to [bus 03]
pci 0000:00:02.4:   bridge window [mem 0xdcb00000-0xdcbfffff]
pci 0000:00:03.1: PCI bridge to [bus 04-33]
pci 0000:00:03.1:   bridge window [io  0xd000-0xefff]
pci 0000:00:03.1:   bridge window [mem 0xc4000000-0xdbffffff]
pci 0000:00:03.1:   bridge window [mem 0x7fb0000000-0x7fd7ffffff 64bit pref]
pci 0000:34:00.0: [1002:1681] type 00 class 0x030000
pci 0000:34:00.0: reg 0x10: [mem 0x7fe0000000-0x7fefffffff 64bit pref]
pci 0000:34:00.0: reg 0x18: [mem 0x7ff0000000-0x7ff01fffff 64bit pref]
pci 0000:34:00.0: reg 0x20: [io  0xf000-0xf0ff]
pci 0000:34:00.0: reg 0x24: [mem 0xdc700000-0xdc77ffff]
pci 0000:34:00.0: enabling Extended Tags
pci 0000:34:00.0: BAR 0: assigned to efifb
pci 0000:34:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:34:00.1: [1002:1640] type 00 class 0x040300
pci 0000:34:00.1: reg 0x10: [mem 0xdc7c8000-0xdc7cbfff]
pci 0000:34:00.1: enabling Extended Tags
pci 0000:34:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:34:00.2: [1022:1649] type 00 class 0x108000
pci 0000:34:00.2: reg 0x18: [mem 0xdc600000-0xdc6fffff]
pci 0000:34:00.2: reg 0x24: [mem 0xdc7cc000-0xdc7cdfff]
pci 0000:34:00.2: enabling Extended Tags
pci 0000:34:00.3: [1022:161d] type 00 class 0x0c0330
pci 0000:34:00.3: reg 0x10: [mem 0xdc500000-0xdc5fffff 64bit]
pci 0000:34:00.3: enabling Extended Tags
pci 0000:34:00.3: PME# supported from D0 D3hot D3cold
pci 0000:34:00.4: [1022:161e] type 00 class 0x0c0330
pci 0000:34:00.4: reg 0x10: [mem 0xdc400000-0xdc4fffff 64bit]
pci 0000:34:00.4: enabling Extended Tags
pci 0000:34:00.4: PME# supported from D0 D3hot D3cold
pci 0000:34:00.5: [1022:15e2] type 00 class 0x048000
pci 0000:34:00.5: reg 0x10: [mem 0xdc780000-0xdc7bffff]
pci 0000:34:00.5: enabling Extended Tags
pci 0000:34:00.5: PME# supported from D0 D3hot D3cold
pci 0000:34:00.6: [1022:15e3] type 00 class 0x040300
pci 0000:34:00.6: reg 0x10: [mem 0xdc7c0000-0xdc7c7fff]
pci 0000:34:00.6: enabling Extended Tags
pci 0000:34:00.6: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 34]
pci 0000:00:08.1:   bridge window [io  0xf000-0xffff]
pci 0000:00:08.1:   bridge window [mem 0xdc400000-0xdc7fffff]
pci 0000:00:08.1:   bridge window [mem 0x7fe0000000-0x7ff01fffff 64bit pref]
pci 0000:35:00.0: [1022:161f] type 00 class 0x0c0330
pci 0000:35:00.0: reg 0x10: [mem 0xdc200000-0xdc2fffff 64bit]
pci 0000:35:00.0: enabling Extended Tags
pci 0000:35:00.0: PME# supported from D0 D3hot D3cold
pci 0000:35:00.3: [1022:15d6] type 00 class 0x0c0330
pci 0000:35:00.3: reg 0x10: [mem 0xdc100000-0xdc1fffff 64bit]
pci 0000:35:00.3: enabling Extended Tags
pci 0000:35:00.3: PME# supported from D0 D3hot D3cold
pci 0000:35:00.4: [1022:15d7] type 00 class 0x0c0330
pci 0000:35:00.4: reg 0x10: [mem 0xdc000000-0xdc0fffff 64bit]
pci 0000:35:00.4: enabling Extended Tags
pci 0000:35:00.4: PME# supported from D0 D3hot D3cold
pci 0000:35:00.5: [1022:162e] type 00 class 0x0c0340
pci 0000:35:00.5: reg 0x10: [mem 0xdc300000-0xdc37ffff 64bit]
pci 0000:35:00.5: enabling Extended Tags
pci 0000:35:00.5: PME# supported from D0 D3hot D3cold
pci 0000:00:08.3: PCI bridge to [bus 35]
pci 0000:00:08.3:   bridge window [mem 0xdc000000-0xdc3fffff]
ACPI: PCI: Interrupt link LNKA configured for IRQ 0
ACPI: PCI: Interrupt link LNKB configured for IRQ 0
ACPI: PCI: Interrupt link LNKC configured for IRQ 0
ACPI: PCI: Interrupt link LNKD configured for IRQ 0
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
efivars: Registered efivars operations
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
mctp: management component transport protocol core
NET: Registered PF_MCTP protocol family
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x09aff000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0x9698a018-0x97ffffff]
e820: reserve RAM buffer [mem 0x96995018-0x97ffffff]
e820: reserve RAM buffer [mem 0xabd20000-0xabffffff]
e820: reserve RAM buffer [mem 0xade48000-0xafffffff]
e820: reserve RAM buffer [mem 0xb063f000-0xb3ffffff]
e820: reserve RAM buffer [mem 0xbaffd000-0xbbffffff]
e820: reserve RAM buffer [mem 0x7be300000-0x7bfffffff]
pci 0000:34:00.0: vgaarb: setting as boot VGA device
pci 0000:34:00.0: vgaarb: bridge control possible
pci 0000:34:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
vgaarb: loaded
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:02: [io  0x0a00-0x0a1f] has been reserved
system 00:02: [io  0x0a20-0x0a2f] has been reserved
system 00:02: [io  0x0a30-0x0a3f] has been reserved
system 00:03: [io  0x04d0-0x04d1] has been reserved
system 00:03: [io  0x040b] has been reserved
system 00:03: [io  0x04d6] has been reserved
system 00:03: [io  0x0c00-0x0c01] has been reserved
system 00:03: [io  0x0c14] has been reserved
system 00:03: [io  0x0c50-0x0c51] has been reserved
system 00:03: [io  0x0c52] has been reserved
system 00:03: [io  0x0c6c] has been reserved
system 00:03: [io  0x0c6f] has been reserved
system 00:03: [io  0x0cd0-0x0cd1] has been reserved
system 00:03: [io  0x0cd2-0x0cd3] has been reserved
system 00:03: [io  0x0cd4-0x0cd5] has been reserved
system 00:03: [io  0x0cd6-0x0cd7] has been reserved
system 00:03: [io  0x0cd8-0x0cdf] has been reserved
system 00:03: [io  0x0800-0x089f] has been reserved
system 00:03: [io  0x0b00-0x0b0f] has been reserved
system 00:03: [io  0x0b20-0x0b3f] has been reserved
system 00:03: [io  0x0900-0x090f] has been reserved
system 00:03: [io  0x0910-0x091f] has been reserved
system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:03: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:03: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:03: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:03: [mem 0xff000000-0xffffffff] has been reserved
pnp: PnP ACPI: found 4 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci_bus 0000:00: max bus depth: 1 pci_try_num: 2
pci 0000:00:02.1: PCI bridge to [bus 01]
pci 0000:00:02.1:   bridge window [mem 0xdc800000-0xdcafffff]
pci 0000:00:02.2: PCI bridge to [bus 02]
pci 0000:00:02.2:   bridge window [mem 0x7ff0300000-0x7ff04fffff 64bit pref]
pci 0000:03:00.0: BAR 7: assigned [mem 0xdcb04000-0xdcb23fff 64bit]
pci 0000:00:02.4: PCI bridge to [bus 03]
pci 0000:00:02.4:   bridge window [mem 0xdcb00000-0xdcbfffff]
pci 0000:00:03.1: PCI bridge to [bus 04-33]
pci 0000:00:03.1:   bridge window [io  0xd000-0xefff]
pci 0000:00:03.1:   bridge window [mem 0xc4000000-0xdbffffff]
pci 0000:00:03.1:   bridge window [mem 0x7fb0000000-0x7fd7ffffff 64bit pref]
pci 0000:00:08.1: PCI bridge to [bus 34]
pci 0000:00:08.1:   bridge window [io  0xf000-0xffff]
pci 0000:00:08.1:   bridge window [mem 0xdc400000-0xdc7fffff]
pci 0000:00:08.1:   bridge window [mem 0x7fe0000000-0x7ff01fffff 64bit pref]
pci 0000:00:08.3: PCI bridge to [bus 35]
pci 0000:00:08.3:   bridge window [mem 0xdc000000-0xdc3fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: resource 9 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: resource 10 [mem 0x840000000-0x7fffffffff window]
pci_bus 0000:01: resource 1 [mem 0xdc800000-0xdcafffff]
pci_bus 0000:02: resource 2 [mem 0x7ff0300000-0x7ff04fffff 64bit pref]
pci_bus 0000:03: resource 1 [mem 0xdcb00000-0xdcbfffff]
pci_bus 0000:04: resource 0 [io  0xd000-0xefff]
pci_bus 0000:04: resource 1 [mem 0xc4000000-0xdbffffff]
pci_bus 0000:04: resource 2 [mem 0x7fb0000000-0x7fd7ffffff 64bit pref]
pci_bus 0000:34: resource 0 [io  0xf000-0xffff]
pci_bus 0000:34: resource 1 [mem 0xdc400000-0xdc7fffff]
pci_bus 0000:34: resource 2 [mem 0x7fe0000000-0x7ff01fffff 64bit pref]
pci_bus 0000:35: resource 1 [mem 0xdc000000-0xdc3fffff]
pci 0000:34:00.1: D0 power state depends on 0000:34:00.0
pci 0000:00:08.1: can't derive routing for PCI INT A
pci 0000:00:08.1: PCI INT A: not connected
pci 0000:00:08.3: can't derive routing for PCI INT A
pci 0000:00:08.3: PCI INT A: not connected
PCI: CLS 64 bytes, default 64
pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
Trying to unpack rootfs image as initramfs...
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:02.0: Adding to iommu group 1
pci 0000:00:02.1: Adding to iommu group 2
pci 0000:00:02.2: Adding to iommu group 3
pci 0000:00:02.4: Adding to iommu group 4
pci 0000:00:03.0: Adding to iommu group 5
pci 0000:00:03.1: Adding to iommu group 5
pci 0000:00:04.0: Adding to iommu group 6
pci 0000:00:08.0: Adding to iommu group 7
pci 0000:00:08.1: Adding to iommu group 8
pci 0000:00:08.3: Adding to iommu group 9
pci 0000:00:14.0: Adding to iommu group 10
pci 0000:00:14.3: Adding to iommu group 10
pci 0000:00:18.0: Adding to iommu group 11
pci 0000:00:18.1: Adding to iommu group 11
pci 0000:00:18.2: Adding to iommu group 11
pci 0000:00:18.3: Adding to iommu group 11
pci 0000:00:18.4: Adding to iommu group 11
pci 0000:00:18.5: Adding to iommu group 11
pci 0000:00:18.6: Adding to iommu group 11
pci 0000:00:18.7: Adding to iommu group 11
pci 0000:01:00.0: Adding to iommu group 12
pci 0000:02:00.0: Adding to iommu group 13
pci 0000:03:00.0: Adding to iommu group 14
pci 0000:34:00.0: Adding to iommu group 15
pci 0000:34:00.1: Adding to iommu group 16
pci 0000:34:00.2: Adding to iommu group 17
pci 0000:34:00.3: Adding to iommu group 18
pci 0000:34:00.4: Adding to iommu group 19
pci 0000:34:00.5: Adding to iommu group 20
pci 0000:34:00.6: Adding to iommu group 21
pci 0000:35:00.0: Adding to iommu group 22
pci 0000:35:00.3: Adding to iommu group 23
pci 0000:35:00.4: Adding to iommu group 24
pci 0000:35:00.5: Adding to iommu group 25
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
AMD-Vi: Extended features (0x246577efa2254afa, 0x0): PPR NX GT [5] IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Virtual APIC enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000a789f000-0x00000000ab89f000] (64MB)
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000003fd)
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=23 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.38)
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
io scheduler mq-deadline registered
pcieport 0000:00:02.1: PME: Signaling with IRQ 32
pcieport 0000:00:02.2: PME: Signaling with IRQ 33
pcieport 0000:00:02.4: PME: Signaling with IRQ 34
pcieport 0000:00:03.1: PME: Signaling with IRQ 35
pcieport 0000:00:03.1: AER: enabled with IRQ 35
pcieport 0000:00:03.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
pcieport 0000:00:08.1: PME: Signaling with IRQ 36
pcieport 0000:00:08.3: PME: Signaling with IRQ 37
pcieport 0000:00:08.3: AER: enabled with IRQ 37
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0x7fe0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: button: Power Button [PWRF]
Estimated ratio of average max frequency by base frequency (times 1024): 1284
Monitor-Mwait will be used to enter C-1 state
ACPI: \_SB_.PLTF.P000: Found 3 idle states
ACPI: \_SB_.PLTF.P001: Found 3 idle states
ACPI: \_SB_.PLTF.P002: Found 3 idle states
ACPI: \_SB_.PLTF.P003: Found 3 idle states
ACPI: \_SB_.PLTF.P004: Found 3 idle states
ACPI: \_SB_.PLTF.P005: Found 3 idle states
ACPI: \_SB_.PLTF.P006: Found 3 idle states
ACPI: \_SB_.PLTF.P007: Found 3 idle states
ACPI: \_SB_.PLTF.P008: Found 3 idle states
ACPI: \_SB_.PLTF.P009: Found 3 idle states
ACPI: \_SB_.PLTF.P00A: Found 3 idle states
ACPI: \_SB_.PLTF.P00B: Found 3 idle states
ACPI: \_SB_.PLTF.P00C: Found 3 idle states
ACPI: \_SB_.PLTF.P00D: Found 3 idle states
ACPI: \_SB_.PLTF.P00E: Found 3 idle states
ACPI: \_SB_.PLTF.P00F: Found 3 idle states
hpet_acpi_add: no address or irqs in _CRS
Linux agpgart interface v0.103
tpm_crb MSFT0101:00: Disabling hwrng
loop: module loaded
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: registered as rtc0
rtc_cmos 00:01: setting system clock to 2023-10-10T18:42:11 UTC (1696963331)
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
i2c_dev: i2c /dev entries driver
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
ledtrig-cpu: registered to indicate activity on CPUs
drop_monitor: Initializing network drop monitor service
NET: Registered PF_INET6 protocol family
Freeing initrd memory: 102320K
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
Key type dns_resolver registered
microcode: CPU0: patch_level=0x0a404102
microcode: CPU12: patch_level=0x0a404102
microcode: CPU13: patch_level=0x0a404102
microcode: CPU3: patch_level=0x0a404102
microcode: CPU2: patch_level=0x0a404102
microcode: CPU5: patch_level=0x0a404102
microcode: CPU4: patch_level=0x0a404102
microcode: CPU7: patch_level=0x0a404102
microcode: CPU6: patch_level=0x0a404102
microcode: CPU9: patch_level=0x0a404102
microcode: CPU8: patch_level=0x0a404102
microcode: CPU11: patch_level=0x0a404102
microcode: CPU10: patch_level=0x0a404102
microcode: CPU14: patch_level=0x0a404102
microcode: CPU15: patch_level=0x0a404102
microcode: CPU1: patch_level=0x0a404102
microcode: Microcode Update Driver: v2.2.
resctrl: L3 allocation detected
resctrl: MB allocation detected
resctrl: L3 monitoring detected
IPI shorthand broadcast: enabled
sched_clock: Marking stable (532967197, 249740)->(535919932, -2702995)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 68146f2d536c7f9efbc818156af57d8945afe4ba'
Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
blacklist: Loading compiled-in revocation X.509 certificates
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing: 61482aa2830d0ab2ad5af10b7250da9033ddcef0'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2017): 242ade75ac4a15e50d50c84b0d45ff3eae707a03'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (ESM 2018): 365188c1d374d6b07c3c8f240f8ef722433d6a8b'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2019): c0746fd6c5da3ae827864651ad66ae47fe24b3e8'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v1): a8d54bbb3825cfb94fa13c9f8a594a195c107b8d'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v2): 4cf046892d6fd3c9a5b03f98d845f90851dc6a8c'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (2021 v3): 100437bb6de6e469b581e61cd66bce3ef4ed53af'
Loaded X.509 cert 'Canonical Ltd. Secure Boot Signing (Ubuntu Core 2019): c1d57b8f6b743f23ee41f4f7ee292f06eecadfb9'
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
Loading compiled-in module X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 68146f2d536c7f9efbc818156af57d8945afe4ba'
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM:   Magic number: 11:370:746
RAS: Correctable Errors collector initialized.
clk: Disabling unused clocks
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 4788K
Write protecting the kernel read-only data: 34816k
Freeing unused kernel image (rodata/data gap) memory: 816K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
  with arguments:
    /init
    splash
  with environment:
    HOME=/
    TERM=linux
    BOOT_IMAGE=/vmlinuz-6.5.0-9-generic
ACPI: video: Video Device [VGA] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1e/LNXVIDEO:00/input/input2
xhci_hcd 0000:34:00.3: xHCI Host Controller
xhci_hcd 0000:34:00.3: new USB bus registered, assigned bus number 1
xhci_hcd 0000:34:00.3: hcc params 0x0120ffc5 hci version 0x120 quirks 0x0000000200000410
xhci_hcd 0000:34:00.3: xHCI Host Controller
xhci_hcd 0000:34:00.3: new USB bus registered, assigned bus number 2
xhci_hcd 0000:34:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 6.5.0-9-generic xhci-hcd
usb usb1: SerialNumber: 0000:34:00.3
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
Intel(R) 2.5G Ethernet Linux Driver
Copyright(c) 2018 Intel Corporation.
igc 0000:01:00.0: PCIe PTM not supported by PCIe bus/controller
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 6.5.0-9-generic xhci-hcd
usb usb2: SerialNumber: 0000:34:00.3
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:34:00.4: xHCI Host Controller
xhci_hcd 0000:34:00.4: new USB bus registered, assigned bus number 3
xhci_hcd 0000:34:00.4: hcc params 0x0120ffc5 hci version 0x120 quirks 0x0000000200000410
xhci_hcd 0000:34:00.4: xHCI Host Controller
xhci_hcd 0000:34:00.4: new USB bus registered, assigned bus number 4
xhci_hcd 0000:34:00.4: Host supports USB 3.1 Enhanced SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 6.5.0-9-generic xhci-hcd
usb usb3: SerialNumber: 0000:34:00.4
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 6.5.0-9-generic xhci-hcd
usb usb4: SerialNumber: 0000:34:00.4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:35:00.0: xHCI Host Controller
xhci_hcd 0000:35:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:35:00.0: USB3 root hub has no ports
xhci_hcd 0000:35:00.0: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000410
xhci_hcd 0000:35:00.0: xHCI Host Controller
xhci_hcd 0000:35:00.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:35:00.0: Host supports USB 3.0 SuperSpeed
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 6.5.0-9-generic xhci-hcd
usb usb5: SerialNumber: 0000:35:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 6.5.0-9-generic xhci-hcd
usb usb6: SerialNumber: 0000:35:00.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: config failed, hub doesn't have any ports! (err -19)
fbcon: Taking over console
Console: switching to colour frame buffer device 128x48
xhci_hcd 0000:35:00.3: xHCI Host Controller
xhci_hcd 0000:35:00.3: new USB bus registered, assigned bus number 7
xhci_hcd 0000:35:00.3: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000410
xhci_hcd 0000:35:00.3: xHCI Host Controller
xhci_hcd 0000:35:00.3: new USB bus registered, assigned bus number 8
xhci_hcd 0000:35:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 6.5.0-9-generic xhci-hcd
usb usb7: SerialNumber: 0000:35:00.3
cryptd: max_cpu_qlen set to 1000
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
ACPI: bus type thunderbolt registered
usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 6.5.0-9-generic xhci-hcd
usb usb8: SerialNumber: 0000:35:00.3
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
xhci_hcd 0000:35:00.4: xHCI Host Controller
xhci_hcd 0000:35:00.4: new USB bus registered, assigned bus number 9
xhci_hcd 0000:35:00.4: hcc params 0x0110ffc5 hci version 0x120 quirks 0x0000000200000410
xhci_hcd 0000:35:00.4: xHCI Host Controller
xhci_hcd 0000:35:00.4: new USB bus registered, assigned bus number 10
xhci_hcd 0000:35:00.4: Host supports USB 3.1 Enhanced SuperSpeed
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 6.5.0-9-generic xhci-hcd
usb usb9: SerialNumber: 0000:35:00.4
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 1 port detected
usb usb10: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb10: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.05
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 6.5.0-9-generic xhci-hcd
usb usb10: SerialNumber: 0000:35:00.4
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 1 port detected
ACPI: bus type drm_connector registered
nvme nvme0: pci function 0000:03:00.0
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
pps pps0: new PPS source ptp0
igc 0000:01:00.0 (unnamed net_device) (uninitialized): PHC added
nvme nvme0: 8/0/0 default/read/poll queues
 nvme0n1: p1 p2 p3
igc 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link)
igc 0000:01:00.0 eth0: MAC: 58:47:ca:70:d1:7b
igc 0000:01:00.0 eno1: renamed from eth0
AMD-Vi: AMD IOMMUv2 loaded and initialized
usb 3-1: new high-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.63
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB2.1 Hub
usb 3-1: Manufacturer: GenesysLogic
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-1: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.63
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB3.1 Hub
usb 4-1: Manufacturer: GenesysLogic
tsc: Refined TSC clocksource calibration: 3194.000 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e0a25d85ab, max_idle_ns: 440795234405 ns
clocksource: Switched to clocksource tsc
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 4 ports detected
[drm] amdgpu kernel modesetting enabled.
amdgpu: CRAT table disabled by module option
amdgpu: Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
amdgpu 0000:34:00.0: enabling device (0006 -> 0007)
[drm] initializing kernel modesetting (YELLOW_CARP 0x1002:0x1681 0x1002:0x1681 0x0A).
[drm] register mmio base: 0xDC700000
[drm] register mmio size: 524288
[drm] add ip block number 0 
[drm] add ip block number 1 
[drm] add ip block number 2 
[drm] add ip block number 3 
[drm] add ip block number 4 
[drm] add ip block number 5 
[drm] add ip block number 6 
[drm] add ip block number 7 
[drm] add ip block number 8 
[drm] add ip block number 9 
amdgpu 0000:34:00.0: amdgpu: Fetched VBIOS from VFCT
amdgpu: ATOM BIOS: 113-REMBRANDT-X37
[drm] VCN(0) decode is enabled in VM mode
[drm] VCN(0) encode is enabled in VM mode
[drm] JPEG decode is enabled in VM mode
Console: switching to colour dummy device 80x25
amdgpu 0000:34:00.0: vgaarb: deactivate vga console
amdgpu 0000:34:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default)
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:34:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
amdgpu 0000:34:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
amdgpu 0000:34:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=2048M
[drm] RAM width 128bits DDR5
[drm] amdgpu: 2048M of VRAM memory ready
[drm] amdgpu: 14904M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F47FC00000).
[drm] Loading DMUB firmware via PSP: version=0x0400003F
[drm] use_doorbell being set to: [true]
[drm] Found VCN firmware Version ENC: 1.27 DEC: 2 VEP: 0 Revision: 0
amdgpu 0000:34:00.0: amdgpu: Will use PSP to load VCN firmware
[drm] reserve 0xa00000 from 0xf47e000000 for PSP TMR
usb 3-3: new high-speed USB device number 3 using xhci_hcd
amdgpu 0000:34:00.0: amdgpu: RAS: optional ras ta ucode is not available
amdgpu 0000:34:00.0: amdgpu: RAP: optional rap ta ucode is not available
amdgpu 0000:34:00.0: amdgpu: SECUREDISPLAY: securedisplay ta ucode is not available
usb 3-3: New USB device found, idVendor=0e8d, idProduct=0608, bcdDevice= 1.00
usb 3-3: New USB device strings: Mfr=5, Product=6, SerialNumber=7
usb 3-3: Product: Wireless_Device
usb 3-3: Manufacturer: MediaTek Inc.
usb 3-3: SerialNumber: 000000000
amdgpu 0000:34:00.0: amdgpu: SMU is initialized successfully!
[drm] Display Core v3.2.241 initialized on DCN 3.1
[drm] DP-HDMI FRL PCON supported
[drm] DMUB hardware initialized: version=0x0400003F
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under DPG Mode).
[drm] JPEG decode initialized successfully.
usb 3-1.3: new high-speed USB device number 4 using xhci_hcd
amdgpu: HMM registered 2048MB device memory
kfd kfd: amdgpu: Allocated 3969056 bytes on gart
kfd kfd: amdgpu: Total number of KFD nodes to be created: 1
amdgpu: Virtual CRAT table created for GPU
amdgpu: Topology: Add dGPU node [0x1681:0x1002]
kfd kfd: amdgpu: added device 1002:1681
amdgpu 0000:34:00.0: amdgpu: SE 1, SH per SE 2, CU per SH 6, active_cu_number 12
amdgpu 0000:34:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
amdgpu 0000:34:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
amdgpu 0000:34:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
amdgpu 0000:34:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
amdgpu 0000:34:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
amdgpu 0000:34:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
amdgpu 0000:34:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
amdgpu 0000:34:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
amdgpu 0000:34:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
amdgpu 0000:34:00.0: amdgpu: ring kiq_0.2.1.0 uses VM inv eng 11 on hub 0
amdgpu 0000:34:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
amdgpu 0000:34:00.0: amdgpu: ring vcn_dec_0 uses VM inv eng 0 on hub 8
amdgpu 0000:34:00.0: amdgpu: ring vcn_enc_0.0 uses VM inv eng 1 on hub 8
amdgpu 0000:34:00.0: amdgpu: ring vcn_enc_0.1 uses VM inv eng 4 on hub 8
amdgpu 0000:34:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 8
[drm] Initialized amdgpu 3.54.0 20150101 for 0000:34:00.0 on minor 0
fbcon: amdgpudrmfb (fb0) is primary device
[drm] DSC precompute is not needed.
usb 3-1.3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.56
usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.3: Product: USB2.1 Hub
usb 3-1.3: Manufacturer: GenesysLogic
hub 3-1.3:1.0: USB hub found
hub 3-1.3:1.0: 4 ports detected
usb 4-1.3: new SuperSpeed USB device number 3 using xhci_hcd
usb 4-1.3: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.56
usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.3: Product: USB3.1 Hub
usb 4-1.3: Manufacturer: GenesysLogic
hub 4-1.3:1.0: USB hub found
hub 4-1.3:1.0: 4 ports detected
usb 3-1.4: new full-speed USB device number 5 using xhci_hcd
[drm] REG_WAIT timeout 1us * 100000 tries - optc31_disable_crtc line:136
Console: switching to colour frame buffer device 240x67
amdgpu 0000:34:00.0: [drm] fb0: amdgpudrmfb frame buffer device
usb 3-1.4: New USB device found, idVendor=1050, idProduct=0407, bcdDevice= 5.10
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: YubiKey OTP+FIDO+CCID
usb 3-1.4: Manufacturer: Yubico
usb 3-1.3.2: new high-speed USB device number 6 using xhci_hcd
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Yubico YubiKey OTP+FIDO+CCID as /devices/pci0000:00/0000:00:08.1/0000:34:00.4/usb3/3-1/3-1.4/3-1.4:1.0/0003:1050:0407.0001/input/input3
hid-generic 0003:1050:0407.0001: input,hidraw0: USB HID v1.10 Keyboard [Yubico YubiKey OTP+FIDO+CCID] on usb-0000:34:00.4-1.4/input0
hid-generic 0003:1050:0407.0002: hiddev0,hidraw1: USB HID v1.10 Device [Yubico YubiKey OTP+FIDO+CCID] on usb-0000:34:00.4-1.4/input1
usb 3-1.3.2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.90
usb 3-1.3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1.3.2: Product: USB2.0 Hub
hub 3-1.3.2:1.0: USB hub found
hub 3-1.3.2:1.0: 4 ports detected
usb 4-1.3.4: new SuperSpeed USB device number 4 using xhci_hcd
usb 4-1.3.4: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.56
usb 4-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.3.4: Product: USB3.1 Hub
usb 4-1.3.4: Manufacturer: GenesysLogic
hub 4-1.3.4:1.0: USB hub found
hub 4-1.3.4:1.0: 4 ports detected
usb 3-1.3.4: new high-speed USB device number 7 using xhci_hcd
usb 3-1.3.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.56
usb 3-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.3.4: Product: USB2.1 Hub
usb 3-1.3.4: Manufacturer: GenesysLogic
hub 3-1.3.4:1.0: USB hub found
hub 3-1.3.4:1.0: 4 ports detected
usb 3-1.3.2.1: new high-speed USB device number 8 using xhci_hcd
usb 3-1.3.2.1: New USB device found, idVendor=046d, idProduct=086b, bcdDevice= 0.17
usb 3-1.3.2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=3
usb 3-1.3.2.1: Product: BRIO 4K Stream Edition
usb 3-1.3.2.1: SerialNumber: 92600297
usb 3-1.3.2.2: new high-speed USB device number 9 using xhci_hcd
usb 3-1.3.2.2: New USB device found, idVendor=0bda, idProduct=0165, bcdDevice=61.23
usb 3-1.3.2.2: New USB device strings: Mfr=1, Product=6, SerialNumber=3
usb 3-1.3.2.2: Product: Smart Card Reader Interface
usb 3-1.3.2.2: Manufacturer: Generic
usb 3-1.3.2.2: SerialNumber: 20070818000000000
usb 3-1.3.2.3: new high-speed USB device number 10 using xhci_hcd
usb 3-1.3.2.3: New USB device found, idVendor=20b1, idProduct=30a0, bcdDevice= 1.01
usb 3-1.3.2.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 3-1.3.2.3: Product: EDIFIER S880
usb 3-1.3.2.3: Manufacturer: EDIFIER
input: EDIFIER EDIFIER S880 as /devices/pci0000:00/0000:00:08.1/0000:34:00.4/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.3/3-1.3.2.3:1.3/0003:20B1:30A0.0003/input/input4
hid-generic 0003:20B1:30A0.0003: input,hidraw2: USB HID v1.10 Device [EDIFIER EDIFIER S880] on usb-0000:34:00.4-1.3.2.3/input3
usb 3-1.3.2.4: new high-speed USB device number 11 using xhci_hcd
usb 3-1.3.2.4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.90
usb 3-1.3.2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1.3.2.4: Product: USB2.0 Hub
hub 3-1.3.2.4:1.0: USB hub found
hub 3-1.3.2.4:1.0: 4 ports detected
usb 3-1.3.2.4.1: new full-speed USB device number 12 using xhci_hcd
usb 3-1.3.2.4.1: New USB device found, idVendor=05ac, idProduct=024f, bcdDevice= 1.09
usb 3-1.3.2.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.3.2.4.1: Product: Keychron K7
usb 3-1.3.2.4.1: Manufacturer: Keychron
apple 0003:05AC:024F.0004: Non-apple keyboard detected; function keys will default to fnmode=2 behavior
input: Keychron Keychron K7 as /devices/pci0000:00/0000:00:08.1/0000:34:00.4/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.4/3-1.3.2.4.1/3-1.3.2.4.1:1.0/0003:05AC:024F.0004/input/input5
apple 0003:05AC:024F.0004: input,hidraw3: USB HID v1.11 Keyboard [Keychron Keychron K7] on usb-0000:34:00.4-1.3.2.4.1/input0
apple 0003:05AC:024F.0005: Fn key not found (Apple Wireless Keyboard clone?), disabling Fn key handling
apple 0003:05AC:024F.0005: Non-apple keyboard detected; function keys will default to fnmode=2 behavior
input: Keychron Keychron K7 as /devices/pci0000:00/0000:00:08.1/0000:34:00.4/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.4/3-1.3.2.4.1/3-1.3.2.4.1:1.1/0003:05AC:024F.0005/input/input6
usb 3-1.3.2.4.2: new full-speed USB device number 13 using xhci_hcd
apple 0003:05AC:024F.0005: input,hidraw4: USB HID v1.11 Keyboard [Keychron Keychron K7] on usb-0000:34:00.4-1.3.2.4.1/input1
usb 3-1.3.2.4.2: New USB device found, idVendor=0b0e, idProduct=245d, bcdDevice= 1.87
usb 3-1.3.2.4.2: New USB device strings: Mfr=0, Product=2, SerialNumber=3
usb 3-1.3.2.4.2: Product: Jabra Link 370
usb 3-1.3.2.4.2: SerialNumber: 70BF925CF0A5015700
input: Jabra Link 370 as /devices/pci0000:00/0000:00:08.1/0000:34:00.4/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.4/3-1.3.2.4.2/3-1.3.2.4.2:1.3/0003:0B0E:245D.0006/input/input7
jabra 0003:0B0E:245D.0006: input,hiddev1,hidraw5: USB HID v1.11 Device [Jabra Link 370] on usb-0000:34:00.4-1.3.2.4.2/input3
usb 3-1.3.2.4.3: new full-speed USB device number 14 using xhci_hcd
usb 3-1.3.2.4.3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
usb 3-1.3.2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.3.2.4.3: Product: USB Receiver
usb 3-1.3.2.4.3: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:08.1/0000:34:00.4/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.4/3-1.3.2.4.3/3-1.3.2.4.3:1.0/0003:046D:C52B.0007/input/input8
hid-generic 0003:046D:C52B.0007: input,hidraw6: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:34:00.4-1.3.2.4.3/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:08.1/0000:34:00.4/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.4/3-1.3.2.4.3/3-1.3.2.4.3:1.1/0003:046D:C52B.0008/input/input9
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:34:00.4/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.4/3-1.3.2.4.3/3-1.3.2.4.3:1.1/0003:046D:C52B.0008/input/input10
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:08.1/0000:34:00.4/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.4/3-1.3.2.4.3/3-1.3.2.4.3:1.1/0003:046D:C52B.0008/input/input11
hid-generic 0003:046D:C52B.0008: input,hiddev2,hidraw7: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:34:00.4-1.3.2.4.3/input1
hid-generic 0003:046D:C52B.0009: hiddev3,hidraw8: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:34:00.4-1.3.2.4.3/input2
logitech-djreceiver 0003:046D:C52B.0009: hiddev2,hidraw6: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:34:00.4-1.3.2.4.3/input2
input: Logitech Wireless Device PID:406f Keyboard as /devices/pci0000:00/0000:00:08.1/0000:34:00.4/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.4/3-1.3.2.4.3/3-1.3.2.4.3:1.2/0003:046D:C52B.0009/0003:046D:406F.000A/input/input13
input: Logitech Wireless Device PID:406f Mouse as /devices/pci0000:00/0000:00:08.1/0000:34:00.4/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.4/3-1.3.2.4.3/3-1.3.2.4.3:1.2/0003:046D:C52B.0009/0003:046D:406F.000A/input/input14
hid-generic 0003:046D:406F.000A: input,hidraw7: USB HID v1.11 Keyboard [Logitech Wireless Device PID:406f] on usb-0000:34:00.4-1.3.2.4.3/input2:1
input: Logitech MX Ergo as /devices/pci0000:00/0000:00:08.1/0000:34:00.4/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.4/3-1.3.2.4.3/3-1.3.2.4.3:1.2/0003:046D:C52B.0009/0003:046D:406F.000A/input/input18
logitech-hidpp-device 0003:046D:406F.000A: input,hidraw7: USB HID v1.11 Keyboard [Logitech MX Ergo] on usb-0000:34:00.4-1.3.2.4.3/input2:1
EXT4-fs (dm-1): mounted filesystem 5ae05a51-e7dd-4f07-afb8-0c68fbc2ca27 ro with ordered data mode. Quota mode: none.
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 253.5-1ubuntu6 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Hostname set to .
systemd[1]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
systemd[1]: Queued start job for default target graphical.target.
systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
systemd[1]: Created slice system-systemd\x2dcryptsetup.slice - Cryptsetup Units Slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
systemd[1]: Created slice user.slice - User and Session Slice.
systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
systemd[1]: Reached target remote-fs.target - Remote File Systems.
systemd[1]: Reached target slices.target - Slice Units.
systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
systemd[1]: Listening on syslog.socket - Syslog Socket.
systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
systemd[1]: Listening on systemd-journald.socket - Journal Socket.
systemd[1]: Listening on systemd-oomd.socket - Userspace Out-Of-Memory (OOM) Killer Socket.
systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
systemd[1]: Starting systemd-journald.service - Journal Service...
systemd[1]: Finished blk-availability.service - Availability of block devices.
systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting [email protected] - Load Kernel Module configfs...
systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
systemd[1]: Starting [email protected] - Load Kernel Module drm...
systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
systemd[1]: Starting [email protected] - Load Kernel Module fuse...
systemd[1]: Starting [email protected] - Load Kernel Module loop...
systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
pstore: Using crash dump compression: deflate
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
pstore: Registered efi_pstore as persistent store backend
systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
systemd-journald[702]: Collecting audit messages is disabled.
systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module configfs.
systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module drm.
systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module fuse.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module loop.
EXT4-fs (dm-1): re-mounted 5ae05a51-e7dd-4f07-afb8-0c68fbc2ca27 r/w. Quota mode: none.
systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
lp: driver loaded but no devices found
systemd[1]: Activating swap swap.img.swap - /swap.img...
systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
systemd[1]: Starting systemd-sysusers.service - Create System Users...
ppdev: user-space parallel port driver
Adding 8388604k swap on /swap.img.  Priority:-2 extents:65 across:440270848k SSFS
systemd[1]: Activated swap swap.img.swap - /swap.img.
systemd[1]: Reached target swap.target - Swaps.
systemd[1]: Finished systemd-random-seed.service - Load/Save OS Random Seed.
systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
systemd[1]: Finished systemd-sysusers.service - Create System Users.
systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
systemd[1]: Started systemd-journald.service - Journal Service.
systemd-journald[702]: Received client request to flush runtime journal.
systemd-journald[702]: /var/log/journal/f35ed044b200452cb209e8302bd2556d/system.journal: Monotonic clock jumped backwards relative to last journal entry, rotating.
systemd-journald[702]: Rotating system journal.
acpi-tad ACPI000E:00: Missing _PRW
usbcore: registered new device driver apple-mfi-fastcharge
ccp 0000:34:00.2: enabling device (0000 -> 0002)
mc: Linux media interface: v0.10
ccp 0000:34:00.2: tee enabled
ccp 0000:34:00.2: psp enabled
RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain package 2^-16 Joules
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
videodev: Linux video capture interface: v2.00
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
kvm_amd: TSC scaling supported
kvm_amd: Nested Virtualization enabled
kvm_amd: Nested Paging enabled
kvm_amd: Virtual VMLOAD VMSAVE supported
kvm_amd: Virtual GIF supported
kvm_amd: LBR virtualization supported
usb 3-1.3.2.1: Found UVC 1.00 device BRIO 4K Stream Edition (046d:086b)
usbcore: registered new interface driver btusb
snd_pci_acp6x 0000:34:00.5: enabling device (0000 -> 0002)
MCE: In-kernel MCE decoding enabled.
mt7921e 0000:02:00.0: enabling device (0000 -> 0002)
usbcore: registered new interface driver uvcvideo
mt7921e 0000:02:00.0: ASIC revision: 79610010
snd_hda_intel 0000:34:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:34:00.6: enabling device (0000 -> 0002)
usb 3-1.3.2.1: current rate 16000 is different from the runtime rate 24000
mt7921e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20230526130917a

mt7921e 0000:02:00.0: WM Firmware Version: ____010000, Build Time: 20230526130958
snd_hda_intel 0000:34:00.1: bound 0000:34:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:34:00.1/sound/card0/input19
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:34:00.1/sound/card0/input20
input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:34:00.1/sound/card0/input21
snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC269VB: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
snd_hda_codec_realtek hdaudioC2D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC2D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC2D0:    inputs:
snd_hda_codec_realtek hdaudioC2D0:      Mic=0x18
snd_hda_codec_realtek hdaudioC2D0:      Internal Mic=0x12
input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:34:00.6/sound/card2/input22
input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:34:00.6/sound/card2/input23
Bluetooth: hci0: Device setup in 143647 usecs
Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
usb 3-1.3.2.1: current rate 16000 is different from the runtime rate 32000
Bluetooth: hci0: AOSP extensions version v0.96
Bluetooth: hci0: AOSP quality report is not supported
usb 3-1.3.2.1: current rate 16000 is different from the runtime rate 48000
EXT4-fs (nvme0n1p2): mounted filesystem ca5a434c-87ff-42a0-bfe4-1e889f9261dd r/w with ordered data mode. Quota mode: none.
loop0: detected capacity change from 0 to 8
loop1: detected capacity change from 0 to 151352
loop2: detected capacity change from 0 to 485072
loop3: detected capacity change from 0 to 22944
loop4: detected capacity change from 0 to 994336
loop5: detected capacity change from 0 to 187776
loop6: detected capacity change from 0 to 21424
loop7: detected capacity change from 0 to 83648
loop8: detected capacity change from 0 to 904
usbcore: registered new interface driver snd-usb-audio
audit: type=1400 audit(1696963348.880:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/opt/brave.com/brave/brave" pid=1101 comm="apparmor_parser"
audit: type=1400 audit(1696963348.880:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ch-checkns" pid=1112 comm="apparmor_parser"
audit: type=1400 audit(1696963348.880:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/opt/google/chrome/chrome" pid=1102 comm="apparmor_parser"
audit: type=1400 audit(1696963348.880:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ch-run" pid=1113 comm="apparmor_parser"
audit: type=1400 audit(1696963348.880:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/crun" pid=1115 comm="apparmor_parser"
audit: type=1400 audit(1696963348.880:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/opt/vivaldi/vivaldi-bin" pid=1104 comm="apparmor_parser"
audit: type=1400 audit(1696963348.880:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/buildah" pid=1107 comm="apparmor_parser"
audit: type=1400 audit(1696963348.880:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/busybox" pid=1109 comm="apparmor_parser"
audit: type=1400 audit(1696963348.884:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/flatpak" pid=1117 comm="apparmor_parser"
audit: type=1400 audit(1696963348.884:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/opt/microsoft/msedge/msedge" pid=1103 comm="apparmor_parser"
mt7921e 0000:02:00.0 wlp2s0: renamed from wlan0
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: MGMT ver 1.22
NET: Registered PF_ALG protocol family
loop9: detected capacity change from 0 to 8
usb 3-1.3.2.1: reset high-speed USB device number 8 using xhci_hcd
usb 3-1.3.2.1: current rate 16000 is different from the runtime rate 48000
usb 3-1.3.2.1: current rate 16000 is different from the runtime rate 48000
usb 3-1.3.2.1: current rate 16000 is different from the runtime rate 48000
rfkill: input handler disabled
wlp2s0: authenticate with 54:b7:bd:ce:6f:d9
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
wlp2s0: send auth to 54:b7:bd:ce:6f:d9 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 54:b7:bd:ce:6f:d9 (try 1/3)
wlp2s0: RX AssocResp from 54:b7:bd:ce:6f:d9 (capab=0x1411 status=0 aid=1)
wlp2s0: associated
wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 54:b7:bd:ce:6f:d9
logitech-hidpp-device 0003:046D:406F.000A: HID++ 4.5 device connected.
systemd-journald[702]: /var/log/journal/f35ed044b200452cb209e8302bd2556d/user-1000.journal: Monotonic clock jumped backwards relative to last journal entry, rotating.
kauditd_printk_skb: 103 callbacks suppressed
audit: type=1400 audit(1696963358.156:115): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=2111 comm="snap-confine" capability=12  capname="net_admin"
audit: type=1400 audit(1696963358.156:116): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=2111 comm="snap-confine" capability=38  capname="perfmon"
rfkill: input handler enabled
usb 3-1.3.2.1: current rate 16000 is different from the runtime rate 48000
usb 3-1.3.2.1: current rate 16000 is different from the runtime rate 48000
usb 3-1.3.2.1: current rate 16000 is different from the runtime rate 48000
rfkill: input handler disabled
audit: type=1400 audit(1696968052.056:117): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=1748688 comm="snap-confine" capability=12  capname="net_admin"
audit: type=1400 audit(1696968052.056:118): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=1748688 comm="snap-confine" capability=38  capname="perfmon"
audit: type=1400 audit(1696968052.656:119): apparmor="DENIED" operation="open" class="file" profile="snap.firmware-updater.firmware-notifier" name="/proc/sys/vm/max_map_count" pid=1748688 comm="firmware-notifi" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
loop9: detected capacity change from 0 to 21536
audit: type=1400 audit(1696994858.048:120): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/20092/usr/lib/snapd/snap-confine" pid=1749793 comm="apparmor_parser"
audit: type=1400 audit(1696994858.048:121): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/20092/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1749793 comm="apparmor_parser"
audit: type=1400 audit(1696994858.204:122): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.hook.configure" pid=1749796 comm="apparmor_parser"
audit: type=1400 audit(1696994858.308:123): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.snap-store" pid=1749795 comm="apparmor_parser"
audit: type=1400 audit(1696994858.316:124): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.snap-store" pid=1749797 comm="apparmor_parser"
loop10: detected capacity change from 0 to 1017816
audit: type=1400 audit(1696995111.800:125): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.firefox.hook.post-refresh" pid=1750002 comm="apparmor_parser"
audit: type=1400 audit(1696995111.852:126): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.firefox.hook.disconnect-plug-host-hunspell" pid=1750001 comm="apparmor_parser"
audit: type=1400 audit(1696995111.852:127): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.firefox.hook.connect-plug-host-hunspell" pid=1750000 comm="apparmor_parser"
audit: type=1400 audit(1696995111.896:128): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.firmware-updater.hook.configure" pid=1750007 comm="apparmor_parser"
audit: type=1400 audit(1696995111.920:129): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.firefox.hook.configure" pid=1749999 comm="apparmor_parser"
audit: type=1400 audit(1696995111.964:130): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snap-store.hook.configure" pid=1750009 comm="apparmor_parser"
audit: type=1400 audit(1696995112.064:131): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.firmware-updater.firmware-updater" pid=1750005 comm="apparmor_parser"
audit: type=1400 audit(1696995112.072:132): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snapd-desktop-integration.hook.configure" pid=1750012 comm="apparmor_parser"
audit: type=1400 audit(1696995112.132:133): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.snapd-desktop-integration.snapd-desktop-integration" pid=1750013 comm="apparmor_parser"
audit: type=1400 audit(1696995112.140:134): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap.firmware-updater.firmware-updater-app" pid=1750006 comm="apparmor_parser"
kauditd_printk_skb: 8 callbacks suppressed
audit: type=1400 audit(1697002019.063:143): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=1750371 comm="snap-confine" capability=12  capname="net_admin"
audit: type=1400 audit(1697002019.063:144): apparmor="DENIED" operation="capable" class="cap" profile="/usr/lib/snapd/snap-confine" pid=1750371 comm="snap-confine" capability=38  capname="perfmon"
audit: type=1400 audit(1697002019.171:145): apparmor="DENIED" operation="open" class="file" profile="snap-update-ns.firefox" name="/var/lib/" pid=1750488 comm="8" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1697002019.175:146): apparmor="DENIED" operation="open" class="file" profile="snap-update-ns.firefox" name="/var/lib/" pid=1750488 comm="8" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
audit: type=1400 audit(1697002019.279:147): apparmor="DENIED" operation="mkdir" class="file" profile="snap.firefox.firefox" name="/run/user/0/" pid=1750517 comm="mkdir" requested_mask="c" denied_mask="c" fsuid=0 ouid=0
audit: type=1400 audit(1697002019.567:148): apparmor="DENIED" operation="capable" class="cap" profile="snap.firefox.firefox" pid=1750371 comm="firefox" capability=2  capname="dac_read_search"
audit: type=1400 audit(1697002019.567:149): apparmor="DENIED" operation="capable" class="cap" profile="snap.firefox.firefox" pid=1750371 comm="firefox" capability=1  capname="dac_override"
audit: type=1400 audit(1697002019.571:150): apparmor="DENIED" operation="capable" class="cap" profile="snap.firefox.firefox" pid=1750371 comm="firefox" capability=2  capname="dac_read_search"
audit: type=1400 audit(1697002019.571:151): apparmor="DENIED" operation="capable" class="cap" profile="snap.firefox.firefox" pid=1750371 comm="firefox" capability=1  capname="dac_override"
usb 3-1: USB disconnect, device number 2
usb 3-1.3: USB disconnect, device number 4
usb 3-1.3.2: USB disconnect, device number 6
usb 3-1.3.2.1: USB disconnect, device number 8
usb 3-1.3.2.2: USB disconnect, device number 9
usb 3-1.3.2.3: USB disconnect, device number 10
usb 3-1.3.2.4: USB disconnect, device number 11
usb 3-1.3.2.4.1: USB disconnect, device number 12
usb 4-1: USB disconnect, device number 2
usb 4-1.3: USB disconnect, device number 3
usb 4-1.3.4: USB disconnect, device number 4
usb 3-1.3.2.4.2: USB disconnect, device number 13
usb 3-1.3.2.4.3: USB disconnect, device number 14
usb 3-1.3.4: USB disconnect, device number 7
usb 3-1.4: USB disconnect, device number 5
usb 3-1: new high-speed USB device number 15 using xhci_hcd
usb 3-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.63
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB2.1 Hub
usb 3-1: Manufacturer: GenesysLogic
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
usb 3-1.3: new high-speed USB device number 16 using xhci_hcd
usb 3-1.3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.56
usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.3: Product: USB2.1 Hub
usb 3-1.3: Manufacturer: GenesysLogic
hub 3-1.3:1.0: USB hub found
hub 3-1.3:1.0: 4 ports detected
usb 3-1.4: new full-speed USB device number 17 using xhci_hcd
usb 3-1.4: New USB device found, idVendor=1050, idProduct=0407, bcdDevice= 5.10
usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.4: Product: YubiKey OTP+FIDO+CCID
usb 3-1.4: Manufacturer: Yubico
usb 3-1.3.2: new high-speed USB device number 18 using xhci_hcd
input: Yubico YubiKey OTP+FIDO+CCID as /devices/pci0000:00/0000:00:08.1/0000:34:00.4/usb3/3-1/3-1.4/3-1.4:1.0/0003:1050:0407.000B/input/input24
hid-generic 0003:1050:0407.000B: input,hidraw0: USB HID v1.10 Keyboard [Yubico YubiKey OTP+FIDO+CCID] on usb-0000:34:00.4-1.4/input0
hid-generic 0003:1050:0407.000C: hiddev0,hidraw1: USB HID v1.10 Device [Yubico YubiKey OTP+FIDO+CCID] on usb-0000:34:00.4-1.4/input1
usb 3-1.3.2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.90
usb 3-1.3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1.3.2: Product: USB2.0 Hub
hub 3-1.3.2:1.0: USB hub found
hub 3-1.3.2:1.0: 4 ports detected
usb 4-1: new SuperSpeed USB device number 5 using xhci_hcd
usb 4-1: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.63
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB3.1 Hub
usb 4-1: Manufacturer: GenesysLogic
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 4 ports detected
usb 3-1.3.4: new high-speed USB device number 19 using xhci_hcd
usb 3-1.3.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.56
usb 3-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.3.4: Product: USB2.1 Hub
usb 3-1.3.4: Manufacturer: GenesysLogic
hub 3-1.3.4:1.0: USB hub found
hub 3-1.3.4:1.0: 4 ports detected
usb 3-1.3.2.1: new high-speed USB device number 20 using xhci_hcd
usb 3-1.3.2.1: New USB device found, idVendor=046d, idProduct=086b, bcdDevice= 0.17
usb 3-1.3.2.1: New USB device strings: Mfr=0, Product=2, SerialNumber=3
usb 3-1.3.2.1: Product: BRIO 4K Stream Edition
usb 3-1.3.2.1: SerialNumber: 92600297
usb 3-1.3.2.1: Found UVC 1.00 device BRIO 4K Stream Edition (046d:086b)
usb 4-1.3: new SuperSpeed USB device number 6 using xhci_hcd
usb 4-1.3: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.56
usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.3: Product: USB3.1 Hub
usb 4-1.3: Manufacturer: GenesysLogic
hub 4-1.3:1.0: USB hub found
hub 4-1.3:1.0: 4 ports detected
usb 3-1.3.2.1: current rate 16000 is different from the runtime rate 24000
usb 3-1.3.2.1: current rate 16000 is different from the runtime rate 32000
usb 3-1.3.2.1: current rate 16000 is different from the runtime rate 48000
usb 3-1.3.2.2: new high-speed USB device number 21 using xhci_hcd
usb 3-1.3.2.2: New USB device found, idVendor=0bda, idProduct=0165, bcdDevice=61.23
usb 3-1.3.2.2: New USB device strings: Mfr=1, Product=6, SerialNumber=3
usb 3-1.3.2.2: Product: Smart Card Reader Interface
usb 3-1.3.2.2: Manufacturer: Generic
usb 3-1.3.2.2: SerialNumber: 20070818000000000
usb 4-1.3.4: new SuperSpeed USB device number 7 using xhci_hcd
usb 4-1.3.4: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.56
usb 4-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.3.4: Product: USB3.1 Hub
usb 4-1.3.4: Manufacturer: GenesysLogic
hub 4-1.3.4:1.0: USB hub found
hub 4-1.3.4:1.0: 4 ports detected
usb 3-1.3.2.3: new high-speed USB device number 22 using xhci_hcd
usb 3-1.3.2.3: New USB device found, idVendor=20b1, idProduct=30a0, bcdDevice= 1.01
usb 3-1.3.2.3: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 3-1.3.2.3: Product: EDIFIER S880
usb 3-1.3.2.3: Manufacturer: EDIFIER
input: EDIFIER EDIFIER S880 as /devices/pci0000:00/0000:00:08.1/0000:34:00.4/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.3/3-1.3.2.3:1.3/0003:20B1:30A0.000D/input/input25
hid-generic 0003:20B1:30A0.000D: input,hidraw2: USB HID v1.10 Device [EDIFIER EDIFIER S880] on usb-0000:34:00.4-1.3.2.3/input3
usb 3-1.3.2.4: new high-speed USB device number 23 using xhci_hcd
usb 3-1.3.2.4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.90
usb 3-1.3.2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1.3.2.4: Product: USB2.0 Hub
hub 3-1.3.2.4:1.0: USB hub found
hub 3-1.3.2.4:1.0: 4 ports detected
usb 3-1.3.2.1: current rate 16000 is different from the runtime rate 48000
usb 3-1.3.2.1: current rate 16000 is different from the runtime rate 48000
usb 3-1.3.2.1: current rate 16000 is different from the runtime rate 48000
usb 3-1.3.2.4.1: new full-speed USB device number 24 using xhci_hcd
usb 3-1.3.2.4.1: New USB device found, idVendor=05ac, idProduct=024f, bcdDevice= 1.09
usb 3-1.3.2.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.3.2.4.1: Product: Keychron K7
usb 3-1.3.2.4.1: Manufacturer: Keychron
apple 0003:05AC:024F.000E: Non-apple keyboard detected; function keys will default to fnmode=2 behavior
input: Keychron Keychron K7 as /devices/pci0000:00/0000:00:08.1/0000:34:00.4/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.4/3-1.3.2.4.1/3-1.3.2.4.1:1.0/0003:05AC:024F.000E/input/input26
apple 0003:05AC:024F.000E: input,hidraw3: USB HID v1.11 Keyboard [Keychron Keychron K7] on usb-0000:34:00.4-1.3.2.4.1/input0
apple 0003:05AC:024F.000F: Fn key not found (Apple Wireless Keyboard clone?), disabling Fn key handling
apple 0003:05AC:024F.000F: Non-apple keyboard detected; function keys will default to fnmode=2 behavior
input: Keychron Keychron K7 as /devices/pci0000:00/0000:00:08.1/0000:34:00.4/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.4/3-1.3.2.4.1/3-1.3.2.4.1:1.1/0003:05AC:024F.000F/input/input27
apple 0003:05AC:024F.000F: input,hidraw4: USB HID v1.11 Keyboard [Keychron Keychron K7] on usb-0000:34:00.4-1.3.2.4.1/input1
usb 3-1.3.2.4.2: new full-speed USB device number 25 using xhci_hcd
usb 3-1.3.2.4.2: New USB device found, idVendor=0b0e, idProduct=245d, bcdDevice= 1.87
usb 3-1.3.2.4.2: New USB device strings: Mfr=0, Product=2, SerialNumber=3
usb 3-1.3.2.4.2: Product: Jabra Link 370
usb 3-1.3.2.4.2: SerialNumber: 70BF925CF0A5015700
input: Jabra Link 370 as /devices/pci0000:00/0000:00:08.1/0000:34:00.4/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.4/3-1.3.2.4.2/3-1.3.2.4.2:1.3/0003:0B0E:245D.0010/input/input28
jabra 0003:0B0E:245D.0010: input,hiddev1,hidraw5: USB HID v1.11 Device [Jabra Link 370] on usb-0000:34:00.4-1.3.2.4.2/input3
usb 3-1.3.2.4.3: new full-speed USB device number 26 using xhci_hcd
usb 3-1.3.2.4.3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
usb 3-1.3.2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.3.2.4.3: Product: USB Receiver
usb 3-1.3.2.4.3: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0013: hiddev2,hidraw6: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:34:00.4-1.3.2.4.3/input2
logitech-hidpp-device 0003:046D:406F.0014: HID++ 4.5 device connected.
input: Logitech MX Ergo as /devices/pci0000:00/0000:00:08.1/0000:34:00.4/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.4/3-1.3.2.4.3/3-1.3.2.4.3:1.2/0003:046D:C52B.0013/0003:046D:406F.0014/input/input29
logitech-hidpp-device 0003:046D:406F.0014: input,hidraw7: USB HID v1.11 Keyboard [Logitech MX Ergo] on usb-0000:34:00.4-1.3.2.4.3/input2:1
usb 3-1: USB disconnect, device number 15
usb 3-1.3: USB disconnect, device number 16
usb 3-1.3.2: USB disconnect, device number 18
usb 3-1.3.2.1: USB disconnect, device number 20
usb 3-1.3.2.2: USB disconnect, device number 21
usb 3-1.3.2.3: USB disconnect, device number 22
usb 4-1: USB disconnect, device number 5
usb 4-1.3: USB disconnect, device number 6
usb 4-1.3.4: USB disconnect, device number 7
usb 3-1.3.2.4: USB disconnect, device number 23
usb 3-1.3.2.4.1: USB disconnect, device number 24
usb 3-1.3.2.4.2: USB disconnect, device number 25
usb 3-1.3.2.4.3: USB disconnect, device number 26
usb 3-1.3.4: USB disconnect, device number 19
usb 3-1.4: USB disconnect, device number 17

Return To AMD Ryzen 7 7735HS System Information